Продукти за aniumprofil 80 x 80 (17)

SANDING FFP 0320Flat foam pad - 150 x 150mm - Primer prep FFP 0500Flat foam pad - 150 x 150mm - Base coat prep FFP 0800Flat foam pad - 150 x 150mm - Clear coat prep FFP 1500Flat foam pad - 150 x 150mm - Clear coat fade

Powder spot cleaner spray, high quality. Suitable for cotton, knitted, wool, silk, synthetic, mixed fabrics It removes spot of: oil, dirt, grease, halos. Fast drying It does not leaves any halos, or rings Chlorinated-free Not toxic Eliminate it with a brush or compressed air It does not indeed the colours

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

DIM Ltd. - PACIFIC Furniture Equipment Products Floor Protectors Eva Floor Protector Pads 120X240mm Color chart 120x240mm Material: Eva Thickness: 2,5mm *The material is laminated to silicone coated paper by using Hot-Melt glue.

ISOBLOC 800 ist eine organisch gebundene Wärmedämmplatte, die aus geschnittenen Steinwollefasern unterschiedlicher Faserdurchmesser und -längen hergestellt wird. Der organische Bindemittelanteil liegt unter 1%, wodurch eine Geruchsbelästigung praktisch ausgeschlossen wird. ISOBLOC 800-Platten sind an allen Stellen gleichmäßig dick, von gleichem Gefüge und besitzen ebene rechtwinklige Kanten. ISOBLOC 800 Produkte sind physiologisch unbedenklich. (Halbwertzeit nach intratrachealer Instillation < 40 Tage, gem. dritter Verordnung zur Änderung der Gefahr­stoff­verordnung vom 12.06.1998, Bundesgesetz­blatt Jahrg. 1998, Teil 1, Nr. 35) Anwendungsbereiche: Der Apparatebau und die Hinterisolierung von Öfen und anderen Wärmegeräten.

• Reparatur von Stahl und Gussteilen • Ausbessern von Fehlbohrungen • Schnell aushärtend Anwendung HUPfastmetall: Ausbessern von Rissen, Fehlbohrungen, Löchern etc. Geeignet für hochfeste Verklebungen von Metall und Metalllegierungen (Stahl, Akluminium). Klebefläche reinigen, Verschluss öffnen und Mischdüse aufschrauben. Die ersten 2 g entsorgen, da diese noch nicht 1:1 gemischt sind. Danach den Klebstoff auftragen und Teile zusammenfügen. Mischdüse entfernen und entsorgen. Verschluss aufsetzen. Angebrochene Kartuschen kühl lagern und möglichst schnell verarbeiten (kann auch ohne Mischdüse verarbeitet werden). Eigenschaften: Temperaturbeständig: -50°C bis +120°C, Topfzeit ca. 5 - 10 Minuten. Nach ca. 30 Minuten kann eine mechanische Bearbeitung der reparierten Stelle erfolgen.

Sullo store online di AS Protezioni è possibile trovare in vendita online lamiere in alluminio anodizzato, lamiere in ferro zincato e pannelli in policarbonato. Le lamiere - di diverso spessore - possono essere acquistate su misura.

Contreplaqués 275cm - Accessoires & Logiciel

Flüssige, transparente Imprägnierung auf Silikatbasis zur Verbesserung von mineralischen Oberflächen. Für die Imprägnierung von Beton- oder Estrichflächen, zementgebundener Industrieböden in Lager-, Produktions- und Kühlräumen usw. Eigenschaften:verbesserte Reinigungsfähigkeit erhöhte Dichtigkeit Lieferform:30 kg Kunststoffgebinde

Walzgrund für Holz auf Basis UV-vernetzbarer Polyacrylatharze; verleiht UV-AC-Walzlackaufbauten eine ausgezeichnete Haftung zum Untergrund bei starker mechanischer Belastung. Innolux Primer Auftragsart Walzen

PARAMETERS Specifications and Sizes: Aluminum skin thickness: 0.06mm-0.50mm Total panel thickness: 2mm, 3mm, 4mm, 6mm Width: 1250mm,1500mm Length: 3200mm - 6000mm Standard size: 1250mm(Width) ×3200mm(Length) , 1500mm(Width) ×3200mm(Length) Non-standard sizes and special colors are available depending on customers’ offers Weight: 4mm is 5.5kg/m² , 6mm is 7.3kg/m² Qty/20'fcl: 2380m²/4mm, 2977m²/3mm Available Colors: We can produce all colors on all professional color cards Feature: Weather resistance, high strength, easy maintenance/convenient for project construction/excellent processability/thermal resistance/sound insulation and good fire prevention performance/good plasticity, impact resistance/shock resistance/ good smoothness, light and strong/ to choose color/ gorgeous and colorful decorative, decorative pattern and design can be customized

Kupferhartlot "Cu-Rophos 2", DIN EN 17672 - CuP279 (L-Ag2P) 2,00 mm vierkant, 500 mm Stäbe, 1,000 Kg Kartons, 25,- kg Umkartons

Ökologisch und kompetent: Die Holz-Zementplatte (geschliffen) für hochwertige Anwendungen im Trockenbau

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Bond Plus Adhesive latex based on elastomeric styrene-butadiene rubber and alkaline silicate in aqueous dispersion, flexibilising, reactive, for adhesive grout and to improve adhesion, the behaviour and performance of mortars and plasters. Production of adhesive, deformable, high-protective and waterproofing performance mortars and plasters for civil, hydraulic, industrial works, in urban, marine and mountain atmospheres. Preparation of hydrating solutions to improve the adhesion and performance of premixed mortars and plasters; preparation of adhesive grouts for non-structural construction joints. Anti-dust treatments, reinforcing concrete surfaces. Shake Bond Plus thoroughly in the tank, and dilute it with water as required. Add the prepared solution to the cement (or lime) and aggregates mixture, in the most suitable dosages for this application, as specified below. It is always essential to carry out preliminary tests for an accurate definition of the mixtures to use, and to check the suitability of the product on the basis of the specific requirements. Refer to the table shown in the product datasheet. Packaging: 25 kg can UM: €/kg

DETAILING & PAINT CORRECTION

Contreplaqués 135cm - Accessoires & Logiciel